Midland Machinery :: Model SP-8

Model SP-8

The Midland Self-Propelled Road Widener features high production (up to 450 TPH) of gravel, dirt, cold-mix or hot-mix asphalt, and high mobility. Enabling a municipal project or a contractor to get the job done quickly and move to the next site fast.

Model SP-8

Single blade, single hydraulic conveyor motor, Converts left or right side spreading

Width: 11ft. 8in. Weight: 18,500 lbs.

Model SPD – 8

Switch from right to left hand spreading in minutes!

Two blades - right and left, with profile control cylinders Dual conveyor drive, right to left with the flip of a switch

Two variable height hopper discharge gates

Width: 12ft. 4in. (11ft.2in. Transport) Weight: 19,260 lbs.

Features Curved Blade Assembly for better material flow improved column/push tube stability. Front Wheel Drive and Steering Axle for improved traction and more pushing power. Hydraulic Blade Extension (2 to 4ft.) Control Panel, with Travel control, Conveyor on/off and belt speed, Engine stop, brake panic button, and positions for all available options Roller Chain on the conveyor belt - positive drive - NO SLIP Rubber Inner Edger Vertically Adjustable Outer Edger Plate for clean edges Specifications Dimensions Length: 19ft. (5.8m) Width: 11ft. 2in. (3.40m) For Transport Height:* 7ft. 10in. (2.38) Weight: See above Wheel Base: 110in. (279cm) Engine John Deere 4045D diesel, 80hp.@2500 rpm. Hydrostatic Traction Drive, Two Speed Trans, - Low: 0-150 ft/min (46m/min), Travel: 0-11 mph (18km/hr) Front Wheel Drive and Front Wheel Steering, 2 (front) 425/65r22.5 and 2 (rear) 11R22.5 Tires Conveyor Left or Right side Discharge, Roller Chain driven, heat and oil resistant Belt, Variable speed Hydraulic Drive 0 to 450 ft./min. (137 m/min) Hopper: 3 cu.yd. (2.3 cu.m) Controls All Drive Steering, Brake and Spreading functions are within easy reach. Moveable Control Station and Seat for Left hand or Right hand operation. Locking Panel Covers and Tool Box Blade Modular sections with a curved profile, 18in. (46cm)tall, Spread Width: 8ft. (2.44m) max, 4ft. (1.22m) fixed blade with a 2 to 4 ft. hyd. extend section. Hydraulic Grade and Slope: 12in. (30.5cm) above to 12in. below grade. Adjustable Outer Edger Plate Flexible Inside Edger Flap Variable length blade Push Tube with Blade Stablizer Brace Push Rollers Self cleaning, pivoting, with extendable frame to 14in. (35cm)	(Click images to enlarge)